Real-time data analysis High-Sensitivity Panoramic Borehole Camera for Environmental Monitoring Boreholes
The viewing angle of the camera is 180 degrees horizontally. The camera has built-in white lighting, which can peep and detect underwater caves with a diameter of more than 80mm. The camera is waterproof and can resist 300m, 500m, 1000m deep water pressure. The camera output connection video cable can be directly connected with the monitor, and the underwater video image captured by the camera can be directly watched on the monitor. The signal can also be connected with the video capture card on the computer, and the underwater video images captured by the camera can be browsed on the computer with video viewing software.
Field-Proven Reliability
-
Everyday Operation Excellence
-
Quick-Deployment Design: Ready for use in under three minutes from vehicle to operation.
-
8x Practical Zoom: Provides clear, usable images for immediate field decisions.
-
360° Routine Scanning: Handles daily inspection workloads with consistent results.
-
Field-Tough Construction
-
Dust and Water Resistance: Withstands typical job site conditions and weather exposure.
-
Impact-Resistant Housing: Survives normal handling and transportation stresses.
-
Temperature Adaptive: Performs reliably in typical seasonal temperature ranges.
-
Operation-Optimized Features
-
Long Battery Life: Supports full day of inspections on single charge.
-
Intuitive Controls: Simple interface requires minimal training.
-
Quick Data Transfer: Fast file handling for efficient reporting.
Product advantages:
- Display: 12-inch screen with keyboard and adjustable settings
- Sensor: Equipped with a Sony 1/3 Inch CCD, 0.1Lux for superior sensitivity
- Resolution: Offers 720TVL clarity, with an 8 inch LCD, 1024*768 pixels
- Camera: Features Automatic and Manual Focus (Optional), full 360-degree rotation for unrestricted control and positioning
- Light: 36Pc LED Light with adjustable bulb luminance
- Depth: Operational range of 0-2000m
- Storage: SD Card/ U Disk, includes a Standard 8G SD Card, 32G Optional
- Probe: Adaptable Panoramic and Rotary functions
- Power: Compatible with AC 20V50Hz, DC12V±5%, and 24V Optional
- Pressure: Max 15Mpa capacity
- Cable tensile strength: Supports up to 250KG
Field Operations Specifications
Safety Operating Procedures for Electric Winches:
1. For optimal safety and performance, install the electric winch on a flat, stable surface where visibility is clear. If the ground is slick, secure ground anchors to ensure the winch maintains a rock-solid grip and does not slip due to the counterforce exerted when the probe moves up or down within the well.
2.
The winch's guide pulley's centerline must align vertically with the wellhead's centerline. If a wellhead pulley is installed, ensure that the gap between the electric winch and the wellhead pulley is typically within 10 meters.
3. Prior to operation, thoroughly inspect the cable for any damage. Verify that the winch's direction aligns with the operational requirements. Ensure the wellhead pulley's forward and reverse movements are seamless. Reset the speed control switch to its original position before activating the machine.
4. When the machine is activated, keep your left hand near the start button to quickly hit the stop button if necessary. With your right hand, gently rotate the speed control switch to facilitate a smooth winch start. To power down, reset the speed control switch to its original position.
5. Once the probe enters the wellhead, control the descent and retraction speed to a maximum of 3 meters per minute to avoid cable entanglement.
6. To reset the depth counter, start the winch and gently withdraw the probe, placing it back into the wellhead. If the screen's depth reading isn't zero, press the "Clear Zero" button above the display to set the length to zero.
7. Keep the drum cable neatly arranged, maintaining at least five loops during use. Ensure no one crosses over the electric winch cable during operations.
8. During the winch's operation, operators must remain at their posts. Keep your left hand near the start button and your right hand on the speed control switch knob.
9. If a sudden power failure occurs during operation, immediately press the shutdown button and reposition the speed control switch to its initial setting.
Our Services:
1. We offer professional technical support at every stage: pre-sale, during the sale, and after-sale.
2. Expect feedback on your inquiries within 8 hours, with resolutions provided in 24 hours.
3. Machines can be tailored to meet your specific requirements.
4. Enjoy peace of mind with our one-year quality warranty.
5. Comprehensive training includes an operation manual, a DVD operation video, and overseas installation options.
6. Former customers can purchase spare parts from our factory at cost price.
Why choose us?
Audited Supplier 
){kind=link}