| After-sales Service: | Yes |
|---|---|
| Warranty: | equipment 2 Year, Sensor 1 Year |
| Max Diameter of Workpiece: | >3200mm |
| Mass Scope of Workpiece: | <900kg |
| Type: | Pile Tester |
| Maxcapacity: | >1000KN |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
Integrated Pile Tester Pile Driving Analyzer (PDA)and Pile Integrity Tester(PIT) for geotechnical suvey
| Performance Parameters of Pile Driving Analyzer (PDA)and Pile Integrity Tester(PIT) | ||
| System |
WINCE operating system; Industrial A8 processor. | |
| System's operating frequency: 1G; memory: 512M | ||
| Sampling parameters |
Number of channels |
6 channels (2 high-strain acceleration channels, 2 strain channels, 1 low-strain acceleration channel, and 1 velocity channel |
| Number of AD bits |
24 bits | |
| Sampling interval |
1.6us-52428μs, continuously adjustable at the spacing of 0.8us | |
| Sampling length |
1K, 2K | |
| Amplification factor |
X1, X2, X4, X8, automatic | |
| Trigger mode |
Channel trigger, steady state trigger | |
| Bandwidth |
High-strain acceleration: 1Hz-10kHz (<5%) | |
| Low-strain acceleration: 1Hz-10kHz (<2%) | ||
| Sampling precision |
±2% | |
| System noise |
<0.2mV(rms) | |
| Time error |
<0.5% | |
| Amplitude nonlinearity |
<10% | |
| Display features |
Touch screen |
Capacitive touch screen |
| Dimensions |
8.4 inch display with optical bonding | |
| Resolution |
800 x 600 | |
| Display mode |
High-contrast concise display | |
| Curve comparison |
Automatic comparison in the same frame | |
| Interface |
Storage mode |
Stored in memory, and automatically backed up in a SD card |
| Output interface |
Two USB interfaces , Bluetooth interface, and USB flash drive interface for data transfer | |
| Input interface |
Capacitive touch screen, standard USB keyboard and mouse | |
| Power supply |
Built-in battery |
11.1V/7Ah rechargeable lithium battery working for more than 8 consecutive hours |
| External power supply |
DC15V4A charger | |
| Specifications |
Volume and weight |
255 x 190 x 50 (mm), 1.9Kg |
| Operating environment |
Operating temperature |
-10 ºC to 50 ºC |
| Operating humidity |
<90% | |
What's Integrated Pile Tester can do?
The Pile Driving Analyzer (PDA) from Pile Dynamics is a very useful tool for estimating the geotechnical capacity and performance of driven and cast-in-place piles.
The test involves attaching accelerometer and strain transducers to the side of the test pile and impacting the top of the pile using a pile driving hammer or drop weight with sufficient energy. The response from the sensors on the pile is recorded by the PDA and analysed later in the office with CAPWAP (CAse Pile Wave Analysis Program).
The Pile Integrity Tester (PIT) users the Sonic Echo or Pulse Echo method to conduct low strain pile integrity testing. PIT is a non-destructive testing method used on concrete piles to detect potential defects such as cracks, necking, soil inclusions and voids.
A wireless accelerometer is attached to the top of the prepared pile and impacted with a small hand-held hammer. The accelerometer monitors the impact and resulting reflections of the compression wave travelling through the pile. The results are evaluated in the field and later in the office using PIT-W software.
Key Output Results about Integrated Pile Tester
maximum force applied to the pile head;
maximum pile head velocity;
maximum energy imparted to the pile;
maximum displacement of the pile head;
pile cap estimate;
maximum compressive stress in the pile;
maximum tensile stress in the pile;
estimated final pile set.
Pile Integrity Factor
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}