Pile Load Testing Instrument Deep Foundation Testing Dynamic Load Testing Pile Driving Analysis High Strain Dynamic Pile Tester With Capwap Analysis Software
It is lightweight, portable, a new generation of high strain test system
Standard
ASTM D4945 Standard Test Method for High-Strain Dynamic Testing of Piles
JGJ106-2014
JGJ 340-2015
JTG/TF81-01-2004
TB 10218-2008
Main features
High integration, high reliability and low noise,excellent performance and low power consumption, reliability and durability
Speed, displacement, stress, velocity displacement, case curve, split screen display, can clearly see the change of each channel signal
Automatic single hit, continuous hit, monitoring mode, real-time monitoring strain sensor deformation.
Max up to 120 hammers/min pile monitoring
Optical capacitance screen, display clear under the strong light
On site Case way analysis, display F-ZV curve, wave curve
24 bit high precision low noise ADC, ADC built-in digital recorder, high signal to noise ratio, high reliability, low noise
Industrial cortex-A9 industrial processing unit, embedded real-time operating system
CCWAPC analysis system, fast and accurate analysis results
Find the defect location immediately and judge the integrity
Adaptive floating point amplification, waveform no distortion
Dual channel synchronous acquisition, ensure accuracy of time domain and frequency domain at the same time
RS and PDA high strain test mode
Work with kinds of speedometer, ICP accelerometer
Built-in wireless transmitter module, link to mobile phone Bluetooth module
Transmit data through 2G/3G/4G wireless network and connect to the office network
Connection between on-site testing and office OA system
Real-time data, remote storage, security
High precision broadband response ICP sensor
Shell materials use full aluminum magnesium alloy
| Display: 10.4-inch TFT true colour LCD with 640 × 480 resolution |
| Memory mode: Hard disc |
| Memory: 3000 piles data |
| Record length: 1k |
| A/D solution: 16 bit |
| Floating zoom: 8 bit |
| System noise: <30μV |
| Dynamic range: ≥ 80dB |
| Transfer mode: USB |
| Frequency bandwidth:10Hz ~ 12000Hz |
| Standby time: Built-in lithium battery> 6 hours |
| Operation mode: Touch screen |
| Channels: 2 channels for acceleration, 2 channels for strain |
| Working temperature: -5 ºC ~ +40 ºC |
| CBM: 25 × 20 × 7 (cm) |
| Weight: 2.5kg (with battery) |
Audited Supplier 
){kind=link}
){kind=link}