Continuous Gyroscopic Inclinometer North Seeking Continuous Fiber Optics Gyro for Deep Oil/GAS Logging
The North Seeking Continuous Fiber Optics Gyro system uses a high performance 3-Axis Aerospace Fibers Optics sensor which allows the tool to perform North Seeking Azimuth measurements for well inclinations up to 90 deg as well as continuous Azimuth reading while tool is moving.
The Fiber Optics sensor is a very stable technology that does not require periodical calibration as the sensor characteristics do not shift with time resulting in a very reliable system for operation.
The system delivers accurate and reliable information of the wellbore trajectory, it requires less north seeking time compared to similar systems and has better mechanical specifications resulting in better shock and vibration resistance.
The North Seeking Continuous Fiber Optics Gyrois an All-in-One system where it can be used for inclination Vertical-to-Horizonal wells and can configured to run in Real-time mode for orientation, Memory Drop mode for wellbore trajectory tracing while tripping.
Application about Continuous Gyroscopic Inclinometer North Seeking Continuous Fiber Optics Gyro
Well Positioning
Gyro Directional Surveying
Geosteering system
Motor & Whipstock Orientation
Memory-Drop Gyro Survey
Oil & Gas, Mining, Geo-Thermal and water wells
Feartures about Continuous Gyroscopic Inclinometer North Seeking Continuous Fiber Optics Gyro
Aerospace Fiber Optics technology
HighAccuracy North Seeking
Vertical-to-Horizontal data measurements
Different operating modes (RTM, MDM, CM)
HighAccuracy, High reliability
Specification
| Inclination |
0° to 90° ±0.1° |
| Azimuth |
0° to 360° ±1° (6°<inc<60°) |
| Gravity High Side |
0° to 360° ±0.5° |
| North Tool-face |
0° to 360° ±1° |
| North Seeking Time |
30 Seconds |
| Continuous Operating Speed |
150 feet/min / 50m/min |
| Memory capacity |
64 Mbit; 200,000 shots |
| Calibration requirements |
None |
| Wireline Cable resistance |
≤ 200Ω |
| Power requirements (Surface Box) |
110/220Vac |
| Power requirements- (MDM-Battery) |
9VDC |
| Operating Environment |
| Max. Temp (No Heatshield) |
70ºC / 158ºF |
| Max. Temp (Heatshield) |
175ºC / 347ºF |
| Max. Pressure |
80MPa / 11,600psi |
| Shock |
1000G 0.5mS half sine wave |
| Vibration |
10G, 30Hz to 200Hz to 30Hz |
If interested in Continuous Gyroscopic Inclinometer North Seeking Continuous Fiber Optics Gyro for Deep Oil/GAS Logging , please feel free to contact us for details
Audited Supplier 
The North Seeking Continuous Fiber Optics Gyro system uses a high performance 3-Axis Aerospace Fibers Optics sensor which allows the tool to perform North Seeking Azimuth measurements for well inclinations up to 90 deg as well as continuous Azimuth reading while tool is moving.
){kind=link}
){kind=link}