| Customization: | Available |
|---|---|
| Accuracy: | <1mm |
| Horizontal Line: | 1 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Probe: It is the part that directly contacts the medium in the hole or slot. According to different detection principles, the probe may contain components such as a weight, an ultrasonic transducer, and a resistivity sensor.
Cable: It is used to connect the probe and the host to transmit signals and power.
Host: It is the core control part of the instrument, responsible for transmitting signals, receiving and processing data from the probe, and displaying measurement results. The host usually has an operation interface to facilitate users to set parameters and operate.
Depth measurement device: It is used to measure the lowering depth of the probe in the hole or slot to ensure the accuracy of the measurement.
| Host |
|
| Display mode | 7-inch true color LCD display, adjustable backlight |
| Processor | high-performance low-power embedded dual-core processor |
| Memory | 32G TF memory card |
| Data interface | USB2.0 |
| Operating system | Linux operating system |
| Control method | photoelectric knob |
| Output result | measured data or report |
| Working temperature | -20ºC~+60ºC |
| Working humidity | ≤90%RH |
| Power supply mode | rechargeable high-energy lithium battery |
| Working voltage | DC36V |
| Working current | ≤1.20A |
| Dimensions | 255mm×192mm×74mm |
| Weight | ≤1.8KG |
| Probe |
|
| Working voltage | DC36V |
| Working current | ≤1.0A |
| Detection depth | standard 50m (customizable) |
| Measuring range | standard 235mm (customizable) |
| Measuring accuracy | 0.1mm |
| Probe size | Φ140mm×425mm |
| Chassis diameter | 250mm |
| Working temperature | -10ºC~60ºC |
| Mass | ≤16KG |
When the sediment probe is lowered to the bottom of the hole, the host reads the probe status. When the probe tilts beyond a certain range, the probe posture is adjusted until it is upright. The host controls the probe to slowly extend, and at the same time measures the probe pressure, probe inclination and extension length. When the probe reaches the bedrock at the bottom of the hole, the probe pressure and probe inclination increase sharply. At this time, the probe extension length is the sediment thickness at the current position.
Applicable to all holes and slots;
The probe has a built-in pressure-tilt sensor, and the results are accurate;
High detection accuracy;
The test results are intuitively displayed.
){kind=link}