| Customization: | Available |
|---|---|
| Accuracy: | <1mm |
| Horizontal Line: | 1 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The GTS-K100CZ(A) Sediment Thickness Tester is an advanced precision instrument designed for accurate and reliable measurement of sediment thickness in geotechnical engineering applications. The thickness of the sediment is calculated based on the difference between the depth of the weight falling and the hole or groove depth by letting the probe fall freely in the hole or groove.
Easy operation: Generally, you only need to put the probe into the hole or slot and follow the operating instructions to quickly obtain the sediment thickness data without complicated operating procedures and professional skills.
Fast detection speed: The sediment thickness detection of a hole or slot can be completed in a short time, which improves the construction efficiency and is especially suitable for large-scale engineering detection.
High accuracy: The use of advanced detection technologies, such as ultrasonic method and resistivity method, can measure the sediment thickness more accurately, providing a reliable basis for engineering quality control.
Wide range of applications:The measured index is independent of the medium characteristics such as mud and water quality
Suitable for sediment thickness detection in all holes and slots.
The probe has a built-in inclination sensor, which has high detection accuracy: the probe has a small diameter and can directly reach the hard rock layer at the bottom of the pile; the probe is equipped with a tray to ensure that the probe stops on the sediment surface; the probe has a built-in inclination sensor to ensure that the probe is upright.
The test results are displayed intuitively: the main unit displays the depth-pressure curve and inclination value in real time, making it easy to determine the sediment thickness on a 7-inch true-color LCD screen.
Drilled cast-in-place piles: In the construction of bored cast-in-place piles in various construction projects, it is used to detect the thickness of the sediment at the bottom of the pile hole to ensure the bearing capacity and stability of the pile foundation.
Underground continuous wall: During the construction of underground continuous wall, the thickness of the sediment at the bottom of the trench is detected to ensure a good combination of the wall and the foundation, and to improve the anti-seepage and bearing performance of the underground continuous wall.
Precautions for use
Conditions in the hole or slot: Before testing, ensure that the water level, mud density and other conditions in the hole or slot meet the test requirements to avoid these factors affecting the accuracy of the test results.
Probe lowering speed: The probe should be lowered slowly and steadily to avoid the probe colliding with the hole wall or slot wall, causing damage to the probe or inaccurate measurement.
Instrument calibration: Calibrate the instrument regularly to ensure the measurement accuracy and precision of the instrument. Calibration should be carried out in a professional organization or in accordance with the requirements of the instrument manufacturer.
Safety protection: During use, operators should pay attention to safety protection and wear protective equipment such as safety helmets and safety ropes to prevent accidents.
|
Probe
|
|
| Working voltage | DC36V |
| Working current | ≤1.0A |
| Detection depth | standard 50m (customizable) |
| Measuring range | standard 235mm (customizable) |
| Measuring accuracy | 0.1mm |
| Probe size | Φ140mm×425mm |
| Chassis diameter | 250mm |
| Working temperature | -10ºC~60ºC |
| Mass | ≤16KG |
| Host |
|
| Display mode | 7-inch true color LCD display, adjustable backlight |
| Processor | high-performance low-power embedded dual-core processor |
| Memory | 32G TF memory card |
| Data interface | USB2.0 |
| Operating system | Linux operating system |
| Control method | photoelectric knob |
| Output result | measured data or report |
| Working temperature | -20ºC~+60ºC |
| Working humidity | ≤90%RH |
| Power supply mode | rechargeable high-energy lithium battery |
| Working voltage | DC36V |
| Working current | ≤1.20A |
| Dimensions | 255mm×192mm×74mm |
| Weight | ≤1.8KG |
| Name | Quantity |
| host | 1 |
| Sediment probe | 1 |
| Orifice bracket | 1 |
| Cable rack(standard 50 meters, customizable) | 1 |
| Main unit charger | 1 |
| Adapter cable | 1 |
| USB transmission cable | 1 |
| Vacuum insulation silicone grease | 1 |
| Sealing ring Several | 1 |
| Battery box (optional) | 1 |
| Aviation chassis | 1 |
| Certificate of conformity | 1 |
| Instruction manual | 1 |
){kind=link}