Smart Ipi Fixed Inclinometers Mems Sensor in Place Inclinometer Digital Inclinometers

• Customization: Available
• Application Area: Construction And Engineering
• Data Transmission: Wireless Inclination Sensor
• Model NO.: GD-S
• Measuring Range: Double-Shaft
• Type: Mems Sensor
• Working Principle: Static Tilt Angle Sensor
• Proudct Name: in Place Inclinometer
• Short Name: Ipi
• Applicaiton: Lateral Displacement
• Total Range: ±30
• Transport Package: Woonden Box
• Trademark: GOLD
• Origin: China
• HS Code: 8544
• Production Capacity: 100 Sets Per Monthed

Product Description

Smart IPI Fixed Inclinometers Mems Sensor In Place Inclinometer Digital inclinometers
In-place inclinometers are widely used to measure the horizontal or vertical displacement,settlement,and landslides of structures such as earth and rock dams,panel dams,slopes,roadbeds,foundation pits,and rock mass landslides. This instrument can be used repeatedly in conjunction with inclinometers and can achieve automation in inclination measurement. The in-place inclinometer adopts an impact resistant tilt sensor,which has good reliability, fast stability time,few installation accessories, easy assembly,and intelligent recognition function.

Technical Parameters

Item	Test Condition	Min	Type	Max	Unit
Power supply	VCC=24.00V		5	10	mA
Work temp		-30	0	+80	0ºC
Total range	Dual-axis		±30		°
Resolution			0.001		°
Accuracy	-15°~+15°		±0.005	±0.01	°
	-30°~+30°		±0.01	±0.02	°
Zero temp drift	-20~+60ºC		±0.002		°/ºC
Storage temp		-30		+80	ºC
IP grade	Water depth of 100m		IP68

1): Resolution is the smallest angle that can be detected by the inclinometer sensor.

2): Accuracy is the differences between the real angle value and the measured value in total range.

3): At room environment, with fixed zero angle output, zero temp drift is the angle deviation with changes of temp.

Structure
The in-place inclinometer consists of a measuring rod, guide wheel,connecting steel wire rope,observation cable,.etc.

 Working Principle
Multiple guide wheel in-place inclinometers are hoisted in series in the inclinometer tube, and the inclination angle or displacement of the measured structure is measured by inclination sensors inside the measuring rod at different elevations. The guide wheel in-place inclinometer can be assembled in series with multiple units, or set up as a measuring unit to work independently, and can be recycled and reused. In-place inclinometers can easily achieve automation of tilt measurement.