360 Degree Deep Underwater Borehole Camera Water Well Inspection Camera
Borehole Inspection Camera is another discipline that optical imaging technology is applied to logging after electromagnetics, physics, and acoustics. It uses the principle of optical imaging to install the camera lens on the front end of the instrument. During logging, the downhole camera lens captures the inner wall of the well tube under the illumination of the visible light source. The image signal is processed by the electronic circuit to generate a frequency pulse signal, which is then transmitted to the receiving device on the ground through a cable, and the well is decoded to form an image. . And through the analysis of the image, real-time monitoring of the borehole casing condition is realized. The detection process directly reflects the downhole conditions, and displays the images in real time, which is intuitive and clear, which is conducive to correctly determining the well conditions and formulating corresponding measures.
I. Function of 360 Degree Deep Underwater Borehole Camera Water Well Inspection Camera
1 To inspection the water leakaging of the well
2 To imaging the blockage of the well
3 To help the repair of the well
4 Provide broadcast quality video of the underwater world
Back to the surface from up to within 2000m below,
5 This camera can be viewed in real time or recorded for later viewing
6 Underwater survey and water well inspection
| No. |
Product Configurations |
Dimension |
Specification |
| 1 |
Probe |
Dia.: 80mm Length: 470mm |
(1) Front lens are imported resins,
(2) Not easy damaged,
(3) Pressure is 16-30Mpa
(can be under 3000m deep water)
(4) Light: 6-12 LED Lights |
| 2 |
Camera |
|
(1) Japan SONY inductor 1/3' ' CCD,
(2) Image definition is HD 750 TVL
(3 Watertight
(4) Camera Angle: 180/360 degree |
| 3 |
Professional logging cable |
Length:
0-2500m(optional) |
(1) With steel wire,
(2) Tension is 150kg,
(3) Destroy tension is 260kg |
| 4 |
Main Control Host |
|
(1) 220V/380V/12V optional.
(2) LCD dispaly can be 8/15inches.
(3) Aircraft grade aluminum alloay material |
| 5 |
Downhole Pulley |
|
Can change the booth size according to the well mouth size |
| 6 |
Logging Winch |
|
Hand/Electrical winch |
| 7 |
Lithography System |
|
(1) SONY disc-carving machine, (optional)
(2) Discs and U disk can be used |
){kind=link}