in-Place Inclinometer Mems Inclinometer Sensors Fixed Inclinometer (IPI) for Long Time Displacement Monitoring Ipi Sensor

• Customization: Available
• Application Area: Construction And Engineering, Geological Prospecting
• Data Transmission: Wired Inclination Sensor
• Model NO.: GD-X100
• Measuring Range: Triaxial
• Type: Horizontal Pendulum Tiltmeter
• Working Principle: Dynamic Tilt Angle Sensor
• Product Name: in-Place Inclinometer
• Installation: Hang
• Sensor Qty: Optional Based on Project
• Accuacy: ±0.1%
• Transport Package: Wooden Box
• Specification: Fixed Inclinometer (IPI) optinal
• Trademark: GOLD
• Origin: China
• HS Code: 8544
• Production Capacity: 100 Sets Per Monthed

Product Description

In-Place Inclinometer MEMS Inclinometer Sensors Fixed Inclinometer (IPI) for Long time Displacement  Monitoring IPI Sensor

Fixed inclinometers(IPI) are widely used to measure horizontal displacement, vertical settlement and landslide of earth-rock dams, panel dams, rock landslides, slopes, roadbeds, foundation pits, civil engineering foundation pits and other buildings. The instrument can be used repeatedly with the inclinometer casing, and can also facilitate the automation of inclination measurement.

The fixed inclinometer (IPI) uses an impact-resistant inclination sensor, which has good reliability, fast stabilization time, few installation accessories and easy assembly

The fixed inclinometer consists of a tilt sensor, a measuring rod, a guide wheel, a signal transmission cable, etc
The fixed inclinometer(IPI) is an instrument for measuring the inclination angle at a fixed point. Multiple inclinometer sensors can be connected in series in the same inclinometer casing and distributed at different elevations to measure the change in the inclinometer angle at the location of the sensor in the inclinometer tube.

The fixed inclinometer(IPI) is often used in situations where the movable inclinometer is not easy to measure for a long time. It can be installed in a position below the water level of the dam reservoir where it is difficult for observers to reach, and can be installed in a position on a high slope and dangerous landslide where it is difficult for observers to go up and down. Observers only need to perform telemetry in the observation room, which saves time and effort.

The fixed inclinometer (IPI) is a reusable measuring instrument that needs to be used in conjunction with the inclinometer casing. Therefore, the inclinometer casing must be buried when using the fixed inclinometer to achieve measurement.