| Customization: | Available |
|---|---|
| Accuracy: | <1mm |
| Horizontal Line: | 1 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.The winch is small and light, easy to transport. Made of stainless steel, it is corrosion-resistant and rust-proof with beautiful appearance.
Wireless WIFI connection, easy to operate;Equipped with a removable power supply, no need for external 220V AC power, strong applicability.
1. The power supply system is highly adaptable: equipped with a removable power supply, no external 220V AC power is required, and it is more applicable;
2. The entire system is fully digitalized: the entire test process and the probe lifting system are fully controlled by software automatically, and the measured data and test results are digitally displayed, stored and printed out
3. Direct on-site printing output: a control box with built-in printing function is selected to achieve printing output while measuring, which is intuitive and real
4. The host system is stable and reliable: the system structure is simple, wireless control, and the operation is simple and convenient:
5. The probe lifting system has good stability: the probes are independently suspended by double load-bearing steel wire ropes and work synchronously to ensure that the probes are stable during operation, without rotation or disturbance. The upper limiter ensures that the wire rope will not break when it is lifted to the top, and the lower limiter ensures that the probe will not be entangled when it is lowered to the bottom of the hole; 6. The ultrasonic probe has a small blind area and high power. The four channel signals are set independently and have strong adaptability: the minimum detection distance of the probe is 200mm, the maximum detection distance is 4000mm, and the corresponding aperture detection range is -. Suitable for almost all engineering hole and groove detection: Ф400mm~Ф8000mm, the maximum mud density can reach 1.4g/cm 7. The system has a self-calibration function: according to the hole diameter value or the slot width value, the sound velocity of the test system is automatically calibrated to ensure that the test results are accurate and reliable; 8. The analysis software is powerful and the output results are rich in content: the host computer analysis software can display, edit, print and output image maps and result charts for the test results, and can automatically determine the hole wall position. The output results include color (or grayscale) images, "X-X and Y-Y" deviation curves, aperture curves and sediment curves, three-dimensional bar graphs, distance measurement, aperture, verticality table of all depth measurement points in the whole hole, etc.; 9. Perfect integration of all functions of the probe: The multifunctional probe perfectly integrates the ultrasonic aperture verticality detection transducer and sediment thickness detection device. In one test, all parameters are detected, and the aperture, hole inclination and sediment thickness detection are realized simultaneously:
10. Dual parameter control of sediment detection ensures accurate and reliable results; the probe has a snow inclination sensor and a force sensor. The inclination sensor controls the probe state, and the pressure sensor controls the probe force. The dual parameters jointly determine the sediment thickness to improve accuracy.
| Multifunctional probe |
|
| Horizontal test direction | four directions of "cross", two sections |
| Detection aperture slot width | medium 400mm~medium 8000mm |
| Ultrasonic signal frequency | 90KHz |
| Detection sediment thickness | 0-235mm (customizable) |
| Mud requirements | mud specific gravity can reach 1.4g/cm, viscosity ≤25S, sand content ≤4% |
| Dimensions | 130mmx130mmx450mm |
| Power supply mode | control box power supply |
| Horizontal accuracy | ≤0.2%FS |
| Ultrasonic power | >8W |
| Sediment accuracy | ≤1mm |
| Output profile | hole XX'+ YY' slot XX', YY'XX'+Y or XX'+ Y' optional |
| Weight | 20KG |
| Ultrasonic aperture probe |
|
| Horizontal test direction | four directions in a cross shape, two sections |
| Detection aperture slot width | Φ400mm~Φ8000mm |
| Ultrasonic signal frequency | 90KHz |
| Mud requirements | Mud density can reach 1.4g/cm3, viscosity ≤25S, sand content ≤4% |
| Dimensions | 120mm×120mm×425mm |
| Power supply mode | control box power supply |
| Horizontal accuracy | ≤0.2%FS |
| Ultrasonic power | ≥8W |
| Sediment accuracy | ≤1mm |
| Output profile | hole XX'+ YY', groove XX', YY', XX'+ Y or XX'+ Y' optional |
| Mass | 18KG |
| Probe lifting CNC winch |
|
| Winch type | wireless fully automatic type |
| Wireless transmission | WIFI wireless communication, transmission distance ≥50m |
| Lifting speed | 0-20m/min continuously adjustable |
| Detection depth | standard 100m (customizable) |
| Depth resolution | ≤0.1mm, depth error ≤0.1% |
| Automatic stop at the hole mouth and bottom | Yes |
| Winch power supply | power supply box |
| Synchronous cable | integrated cable on the winch, CNC synchronous lifting |
| Probe suspension | double wire roller independent suspension probe, stable and reliable |
| Working temperature | -20ºC~50ºC |
| Working humidity | ≤90%RH |
| Dimensions | 770mm×540mm×595mm |
| Mass | 70KG |
){kind=link}