| Customization: | Available |
|---|---|
| Accuracy: | 1mm |
| Horizontal Line: | 1 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GD-HPI High Strain Dynamic Pile Integrity Tester
To obtain near the top of a foundation impacted by a hammer or drop weight, high strain dynamic testing system consists of estimating soil resistance and its distribution from force and evocity measurements. It is significantly faster and less expensive than conventional static test methods. Many piles may be tested on a given project in a short period of time at modest cost.
Features:* Screw piles
* Dynamic pile testing
* Bridges, roads, tunnels, building construction
* Urban engineering construction
| Mian Technical Parameters | |
| Mainframe | |
| Operating System | High stablity and reliaility embedded WINCE operating system |
| Control Mode | A8 industrial grade core |
| Screen | 800*800,8.4 inch,Visible under strong light |
| Operation Way | touchable screen |
| A/D Tranfermation | 24 bit |
| Floating Point Amplification | 1~84 times |
| Sampling Interval | 48μs,98μs,144μs |
| Sampling Length | IK.2K |
| Measurement Precision | ±2% |
| Trigger Way | channel trigger, steady state trigger |
| trigger Level | 8 grades |
| Data Storage | Memory storage, memory card automatic backup + U pot special storage + off-site storage (only for benefit control platform) |
| Working Mode | Independent collection, storage + real-time upload without location |
| Data Uploading | Gaolingsoft Bluetooth communication module + 4G/3G/2G data network |
| Port | USB interface. 12-core dedicated interface, accelerometer interface, didimeter interface |
| Power | 7000mAh, Li battery pack, AC/DC15W4A, ±5% power adaptation question, total machine power consumption s8W |
| Ambient Temperature, Humidity | 20=C~50ºC,90%rh |
| Size & Weight | 255x180x50(mm),1.7Kg |
| High Strain Acceleratemeter | |
| Charging Sensitivity | 31FC/g |
| Measuring Range | 1000g |
| Frequency Range | 1~5KHz |
| Force Sensor | |
| Measurement Range | 0~2000μE |
| RS Sensitivity Coefficient | 3.7 μV/μe |
| No. | Item | Unit | Quantity |
| 1 | HPI Mainframe | Set | 1 |
| 2 | High Strain Adaptor | Set | 1 |
| 3 | High Strain Accelerometer | Set | 1 |
| 4 | Stress Ring | Piece | 1 |
| 5 | High String Cable | Roll | 1 |
| 6 | Touch-screen pen | Piece | 1 |
| 7 | Charger | Piece | 1 |
| 8 | AC charging wire | Piece | 1 |
| 9 | U disk(software inside) | Piece | 1 |
| 10 | Instrument strap | Piece | 1 |
| 11 | Mainframe Box | Set | 1 |
){kind=link}