Crosshole Multi Channels Sonic Logging Sonic Instrument Deep Foundation Pile Integrity Testing CSL Cross Hole Sonic Wave Foundation Monitoring Instrument
Ultrasonic pile integrity test, ultrasonic test for piles, pile integrity test, bored ple testing, sonic pile testing instrument
1. Physical exploration, geological exploration and other fields;
2. Evaluation of rock wave velocity by cross-hole method and detection of loose ring;
3. Rock wave velocity is evaluated by single hole and double receiver method, and loose circle is detected.
|
|
|
|
|
| Pile integrity tester |
Depth recording wheel |
Guide wheel on pipe mouth |
Tripod |
Radical transducer |
The multi-channel ultrasonic tester is the perfect device for cross-hole acoustic wave transmission method. This instrument is specifically designed for testing the pile foundation integrity by using acoustic wave transmission method, and contains the unique multi-channel self-emission and self-receiving system. It also enables the all-profile test of concrete pile with only one lift (3 or 4 acoustic testing pipes embedded), which makes the detection process more efficient and simpler.
| channels |
3 |
4 |
| Number of tested profiles per time |
3 |
6 |
| Control mode |
Built in A8 industrial control board |
| Screen |
10.4 inches high definition LCD screen |
| Operating method |
Touch screen |
| Storage method |
built-in electronic hard disk (≥4GB) + U disk capacity |
| Acquisition mode |
Synchronous continuous mining |
| Sampling interval |
0.05μs~1638.4μs adjustable |
| Acoustic transit time accuracy |
0.05μs |
| Record length |
512~4096 |
| Acoustic transit time range |
±1677.7ms |
| Emission voltage(V) |
65,250,500,1000 V adjustable |
| Amplifier gain |
82dB |
| Dynamic range |
154 dB |
| Amplifier gain accuracy |
0.5dB |
| Band width (12dB) |
2~500kHz |
| Receiver sensitivity |
≤10μV |
| Channels interference |
≤1/400 |
| Transmission port |
USB,MiniUsb,WiFi,Bluetooth |
| Measuring method |
Horizontal test, inclined test, retest, finer increment test |
The principle of ultrasonic transmission method for detecting concrete quality is to embed several acoustic pipes in the pile as the channel for ultrasonic receiving and transmitting transducers. During detection, a transmitting probe for transmitting ultrasonic wave is placed in one tube, and a receiving probe for receiving ultrasonic wave is placed in the other tube. The two probes are lifted synchronously from the bottom up, and the instrument records the acoustic characteristics of ultrasonic propagation in the concrete measuring surface composed of two tubes. According to the arrival time, amplitude, frequency change and waveform distortion of the wave, through analysis and treatment, the concrete quality, the nature, size, spatial position and concrete uniformity of the existing defects can be determined.
Audited Supplier 
){kind=link}