Advanced Horizontal in-Place Inclinometer System with Mesm Sensor

• Customization: Available
• Application Area: Construction And Engineering, Geological Prospecting
• Data Transmission: Wired Inclination Sensor
• Model NO.: GGD
• Measuring Range: Double-Shaft
• Type: Water Tube Inclinometer
• Working Principle: Dynamic Tilt Angle Sensor
• Product Name: Inclinometers
• Application: Lateral Displacement
• Accuacy: 1mm
• Sensor Qty: Optional
• Transport Package: Carton Box
• Specification: sensor optional
• Trademark: GOLD
• Origin: China
• HS Code: 8544
• Production Capacity: 100 Sets Per Monthed

Product Description

In-place inclinometer horizontal in-place inclinometers IPI System with MESM sensor

In-place inclinometer horizontal in-place inclinometers IPI System with MESM sensor is designed to reliably measure lateral movement in and around dams, embankments, landfills, landslides, piles, piers, retaining walls, and abutments, particularly when continuous remote monitoring is required. The in-place inclinometer adopts an impact resistant tilt sensor,which has good reliability, fast stability time,few installation accessories, easy assembly,and intelligent recognition function.

In-place inclinometer, is the conventional portable inclinometer is difficult to field reading occasions, the measurement unit through the series or parallel connection, with the inclined tube can be used repeatedly, the output signal for the RS485 Modbus protocol, can directly display the measurement hole of different depths of the structure offset angle, and then calculate the horizontal displacement according to the trigonometric relationship, simultaneous measurement of the temperature of the buried point, and convenient access to the customer's data acquisition system.

Adopting high-precision MENS sensors with high sensitivity, stable measurement performance, small temperature effect, fast stabilization, few installation accessories and easy assembly, it is commonly used in earth and rock dams, panel dams, geotechnical slopes, embankments, pits, etc., which require automated real-time monitoring.
slopes, embankments, pits, etc. For example, it can be installed on dams for real-time monitoring of dam safety, and on dangerous high slopes that are not easily accessible to observers, who can obtain monitoring data by telemetry in the observation room.

Technical Parameters

Item	Test Condition	Min	Type	Max	Unit
Power supply	VCC=24.00V		5	10	mA
Work temp		-30	0	+80	0ºC
Total range	Dual-axis		±30		°
Resolution			0.001		°
Accuracy	-15°~+15°		±0.005	±0.01	°
	-30°~+30°		±0.01	±0.02	°
Zero temp drift	-20~+60ºC		±0.002		°/ºC
Storage temp		-30		+80	ºC
IP grade	Water depth of 100m		IP68

The in-place inclinometer consists of a measuring rod, guide wheel,connecting steel wire rope,observation cable,.etc.