Pile Driving Analyzer (PDA) High Strain Dynamic Tester for Pile Integrity Testing Pile Foundation Load Equipment and Pile Low Strain Testing Equipment

• After-sales Service: Yes
• Warranty: Yes
• Max Diameter of Workpiece: Pile Driving Analyzer
• Mass Scope of Workpiece: Pile Driving Analyzer
• Type: Pile Driving Analyzer
• Maxcapacity: Pile Driving Analyzer
• Model NO.: PDA and PIT Analyzer
• Accuracy Grade: Pile Driving Analyzer
• Load Way: Pile Driving Analyzer
• Loading Method: Pile Driving Analyzer
• Display: High Strain Dynamic Tester
• Control: High Strain Dynamic Tester
• Weight: High Strain Dynamic Tester
• Power Source: High Strain Dynamic Tester
• Oil Cylinder Position: Pile Integrity Testing
• Apparatus Name: Pile Driving Analyzer (PDA) High Strain Dynamic Te
• Sampling Resolution: 24-Digit Ad
• Sampling Interval: 0.8us-52428us Continuously Adjustable
• Trigger Mode: Channel Trigger, Stable State Trigger.
• Transport Package: Pile Integrity Testing
• Specification: Pile Integrity Testing
• Trademark: GOLD
• Origin: China
• HS Code: 90318090
• Production Capacity: 100 Set Per Month

Product Description

Pile Driving Analyzer (PDA) High Strain Dynamic Tester for Pile Integrity Testing Pile Foundation Load Equipment And Pile Low Strain Testing  Equipment 

Product Description

Pile Driving Analyzer (PDA) High Strain Dynamic Tester uses signals from reusable sensors to collect data. It consist of 2 Accelerometers and 2 strain gages. When a hammer or weight strikes top of pile, the compressive stress wave travel down its shaft and reflect up. Soil resistance forces along the shaft and at the toe cause wave reflection and are felt at the top of the pile. The measured force and velocity near pile top thus provides necessary and sufficient information to estimate soil resistance and its distribution. PDA Testing is a quick, low cost and very reliable tool. You save time and money. You gain quality assurance.

What's precaution if done Pile Driving Analyzer (PDA) High Strain Dynamic Testing?
The Pile Driving Analyzer (PDA) High Strain Dynamic Tester technology applies dynamic measurements to solve pilling problems. Force and acceleration measurements taken near the top of a pile during impact provide the necessary information for determining:

Activated bearing capactity
Hammer performance
Maximum driving stresses
Pile or Shaft Integrity
PDA test can be applied on all types of pile, such as pre-cast concrete pile, in-cast placed pile, steel pile, timber pile, composite pile,...

Product Parameters

Operating system	WINCE operating system A8 industrial grade core.	System clock	System operating frequency 1G, 512M internal storage
Screen features	8.4-inch integrated industrial LCD screen, 800X600 resolution ratio. Sunlight readable.	Input interface	Capacitive touchscreen, USB mouse
Display mode	Full superposed display mode	Sampling resolution	24-digit AD
Sampling interval	0.8us-52428μs continuously adjustable	Trigger mode	Channel trigger, stable state trigger.
Magnification factor	X1, X2, X4, X8 adaptive zoom	Sampling length	IK , 2K
Storage mode	Internal storage, memory card backup. The amount of backup data is more than 1 million.	Transfer pattern	Standard USB interface, USB flash disk transfer.
Internal battery	11.1V/7Ah ultra-large capacity rechargeable lithium battery can work continuously for more than 8 hours	External power supply	DC15V4A charger
Volume weight	255 x 195 x50 ( mm ) , 1.7Kg	Working temperature	-10-50 ºC

Pile Driving Analyzer (PDA) High Strain Dynamic Tester Software result from Case Pile Wave Analysis or WAP